China High Efficiency Worm Gear Series Double Enveloping Worm Gear Worm Gearbox cast iron worm gearbox

Merchandise Description

Large Performance Cone Worm Gear Sequence Double Enveloping Worm Equipment Worm Gearbox

Merchandise Description

Collection C  double enveloping worm gear
Design: one hundred – 500
Ratio: ten -63
Output Torque : 683 – 51180 N.m
Rating Energy : 47/25HP(1.41Kw) – 597HP(448Kw)

1, Higher torque double enveloping worm gear alter toughest working condition .
two,Common layout double enveloping worm gearbox.
three, Sleek and noiseless operation double worm gearbox.
4, Larger driving performance than standard worm equipment.
five, Increasing loading ability .
six, Rigid high quality check prior to delivery
seven, Personalized design and style for a variety of software
8, Long existence service time period
nine,appropriate cost with moderated
10, moderate price tag & high good quality

In a Worm Gearbox, Worm Reduction Equipment Box, Worm Speed Reducer and Equipment Motor Manufacturer, three to 11 equipment enamel are generally in get in touch with with the worm, based upon the ratio. The improved number of pushed equipment tooth that are in contact with the worm significantly raises torque capacity also raises shock load resistance. In addition to growing the variety of driven equipment teeth in make contact with with the worm, Worm Gearbox, Worm Reduction Equipment Box, Worm Velocity Reducer and Equipment Motor Maker also will increase the contact spot on each gear tooth. The actual regions of instantaneous speak to among the worm threads and the driven equipment tooth are traces. These strains of make contact with shift throughout the face of the equipment tooth as it progresses through its total time of mesh with the worm. The strains of speak to in double-enveloping worm gearing are configured to enhance the power transmission ability and decrease the tension on every equipment tooth.

 

Operating conditions

Two shafts for 90 ° Intersect, enter pace have to not be far more than 1500 rpm.The working environment temperature should range from  0 ~ forty ° C, when the environment temperature below ° C or above forty ° C.Before starting the lubricating oil to corresponding heating and cooling, The worm shafts, reverse operation can be constructive.

Data sheet on CUW double enveloping worm gear reducer :

Model ShaftDia. (mm) Center Height (CUW) (CUW) Output shaft Dia. Electrical power Ratio Permitted Torque Excess weight
(CUW) input Solid(h6) (mm) (mm) (kw) (Nm) (KGS)
one hundred 28 190 forty eight 1.41~eleven.five 10 .25~ 62 683-1094 forty two
a hundred twenty five 32 225 55 2.42~19.7 10 .25 ~ 62 1170~2221 65
one hundred forty 38 255 sixty five 3.ninety four~twenty five.9 10 .25 ~ 62 1555 ~ 3473 85
one hundred sixty 42 290 70 4.39~35.seven 10 .25 ~ 62 2143 ~4212 one hundred twenty
180 forty eight 320 eighty 5.83~47.five 10 .25 ~ 62 2812 ~ 5387 170
200 fifty five 350 90 seven.52 ~61.two 10 .25 ~ 62 3624 ~6859 220
225 60 390 one hundred 9.9~81.4 10 .25 ~ 62 4872 ~ 9224 290
250 65 430 110 twelve.9 ~one zero five 10 .twenty five~ 62 6284~11892 380
280 70 480 120 16.9 ~ 138 10 .25 ~ 62 8347 ~ 15820 520
315 seventy five 530 one hundred forty 22.5 ~183 10 .25 ~ 62 11068~ 19450 700
355 80 595 a hundred and fifty thirty~245 10 .25 ~ 62 14818 ~28014  1030
400 90 660 one hundred seventy 32.1 ~261 10 .25 ~ 62 15786~29918 1400
450 a hundred 740 a hundred ninety 42.6 ~347 10 .25 ~ 62 2571~39881 1980
five hundred one hundred ten 815 210 54.9 ~ 448 10 .25 ~ 62 27097~51180 2700

 

Gain: 
The advantage of CZPT High Effectiveness, Low Noice Cone Worm Sequence Worm Gearbox design are spectacular. Very first, the total load is divided between a lot more specific gear tooth, and the load is more divided in which teeth assistance 2 strains of speak to. This outstanding load distribution drastically boosts load carrying potential. Second, the enhanced torque throughput permits a more compact reducer to make the same sum of torque, resulting in dimension and fat personal savings.
Double-enveloping worm gearing can have masses that would need considerably bigger and heavier cylindrical worm gearing.

 

 Double-enveloping worm gearbox determine :

(Simply click on picture for far more info)

 

 

Packaging & Shipping

Package :                                                                                                

SGR gearbox use regular wooden situation per gear motor Shipping and delivery :                                                                                               

In accordance to Consumer need, we shipping and delivery items by distinct transportation, Sea transport, Air Transportation / Convey or Truck transportation and many others.

You Appoint, We Services!

Our Companies

With all our actions DNV-ISO 9001, SGS -qualified, we stand for leading-high quality services. Entrusting your gearboxes to the care of our Providers.

Help safeguard your gearbox from wear and grinding, SGR gearbox converts torque reliably and effi­ciently.
We customize our CZPT planetary gear units, double enveloping worm gearbox, helical gear motor, modular design helical gear unit, worm gearbox, cycloidal gearbox and so forth to suit your application and meet your requirements. 

These characteristics permit a dependable and risk-free support life of in excess of 200 000 operational several hours. 

Our buyers have been putting their have faith in in CZPT equipment units because 1997. More than five hundred 000 equipment models of our gearbox are in use reliably close to the world, in several cases below quite harsh problems.

 

 

 

US $1,000-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model ShaftDia. (mm) Center Height (CUW) (CUW) Output shaft Dia. Power Ratio Permitted Torque Weight
(CUW) input Solid(h6) (mm) (mm) (kw) (Nm) (KGS)
100 28 190 48 1.41~11.5 10 .25~ 62 683-1094 42
125 32 225 55 2.42~19.7 10 .25 ~ 62 1170~2221 65
140 38 255 65 3.94~25.9 10 .25 ~ 62 1555 ~ 3473 85
160 42 290 70 4.39~35.7 10 .25 ~ 62 2143 ~4212 120
180 48 320 80 5.83~47.5 10 .25 ~ 62 2812 ~ 5387 170
200 55 350 90 7.52 ~61.2 10 .25 ~ 62 3624 ~6859 220
225 60 390 100 9.9~81.4 10 .25 ~ 62 4872 ~ 9224 290
250 65 430 110 12.9 ~105 10 .25~ 62 6284~11892 380
280 70 480 120 16.9 ~ 138 10 .25 ~ 62 8347 ~ 15820 520
315 75 530 140 22.5 ~183 10 .25 ~ 62 11068~ 19450 700
355 80 595 150 30~245 10 .25 ~ 62 14818 ~28014  1030
400 90 660 170 32.1 ~261 10 .25 ~ 62 15786~29918 1400
450 100 740 190 42.6 ~347 10 .25 ~ 62 20998~39881 1980
500 110 815 210 54.9 ~ 448 10 .25 ~ 62 27097~51180 2700
US $1,000-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model ShaftDia. (mm) Center Height (CUW) (CUW) Output shaft Dia. Power Ratio Permitted Torque Weight
(CUW) input Solid(h6) (mm) (mm) (kw) (Nm) (KGS)
100 28 190 48 1.41~11.5 10 .25~ 62 683-1094 42
125 32 225 55 2.42~19.7 10 .25 ~ 62 1170~2221 65
140 38 255 65 3.94~25.9 10 .25 ~ 62 1555 ~ 3473 85
160 42 290 70 4.39~35.7 10 .25 ~ 62 2143 ~4212 120
180 48 320 80 5.83~47.5 10 .25 ~ 62 2812 ~ 5387 170
200 55 350 90 7.52 ~61.2 10 .25 ~ 62 3624 ~6859 220
225 60 390 100 9.9~81.4 10 .25 ~ 62 4872 ~ 9224 290
250 65 430 110 12.9 ~105 10 .25~ 62 6284~11892 380
280 70 480 120 16.9 ~ 138 10 .25 ~ 62 8347 ~ 15820 520
315 75 530 140 22.5 ~183 10 .25 ~ 62 11068~ 19450 700
355 80 595 150 30~245 10 .25 ~ 62 14818 ~28014  1030
400 90 660 170 32.1 ~261 10 .25 ~ 62 15786~29918 1400
450 100 740 190 42.6 ~347 10 .25 ~ 62 20998~39881 1980
500 110 815 210 54.9 ~ 448 10 .25 ~ 62 27097~51180 2700

Worm Reducer – What You Need to Know

When shopping for a Worm Reducer, it is important to consider the functions and features of the unit. It is also important to take into account its cost. We will take a look at the different types of worm reducers and the applications that they can be used for. This will help you choose the right unit for your application.
worm_reducer

Features

Worm gears are popular in instruments that require fast stopping, such as elevators and lifts. Their soft materials allow them to absorb shock, which reduces the likelihood of failure. They are also beneficial in heavy-duty machines, such as rock crushers. Some manufacturers offer special worms with zero backlash and high-accuracy reduction.The worm reducer has a variety of features, including an axial pitch and a circular pitch. The axial pitch of the worm must match the circular pitch of the larger gear. Its threads are left or right-handed, and its lead angle is the distance a point on the thread travels during a revolution of the worm.The worm gear reducer is widely available, and gear manufacturers typically maintain a large inventory of them. Because worm gears are standardized, their mounting dimensions are generally uniform across manufacturers. This means that choosing one will not require you to change the height, length, or diameter of the output shaft. Worm gear reducers also have dimensional consistency.Worm gears are very efficient. They have a high load capacity and a low friction coefficient. The worm gears also have a precise tooth profile, which reduces speed fluctuations and allows for quiet operation.

Functions

Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer to function properly.Another important feature of a worm reducer is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.

Applications

This market report analyzes the Worm Reducer market from a global perspective. It includes a comprehensive analysis of the current market trends and future growth prospects. It also provides information about the competitive landscape and the main players in the industry. The report also highlights the key factors affecting the growth of the Worm Reducer market.
The major regional markets for the Worm Reducer include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
worm_reducer

Cost

Cost is an important consideration when selecting a worm reducer. The initial cost of a worm gear reducer is considerably lower than other types of gear reducers. Worm gear reducers are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer.Stainless steel worm gear reducers from WorldWide Electric offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducers are available in stock from all six of WorldWide Electric’s regional warehouses. They also come with free prepaid freight.Worm gear reducers are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducers are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.

aspect

Worm reducers vary in size. They have one, two or more threads. Each thread has a lead angle. A high ratio has more teeth than a low gear, and a low ratio has fewer teeth. These differences are the result of gearing. The size of the worm gear reducer should be selected according to the specific application.The worm gear reducer saves space and provides more torque. Agknx Gearbox has created a variety of models to overcome common deceleration challenges, from standard to hygienic markets. The superior transmission Agknx range is designed to solve common deceleration challenges and expand to meet the needs of the sanitary industry.The diameter of the worm reducer is an important consideration. Its diameter should be equal to or slightly larger than the diameter of the grinding wheel or tool. This will affect the pressure angle. The pressure angle on a worm reducer depends on several factors, including its diameter and lead angle. The diameter of the grinding wheel or tool also has an effect on the profile of the worm.Worm gear reducers are common. Many gear manufacturers have large stocks of these gear reducers. Since gears are standardized, the mounting dimensions of worm gears are also common among manufacturers. This makes it easy to select a worm gear reducer for your application. In addition, the worm gear reducer is easy to install and maintain.
worm_reducer

Worm gear reducer oil

Worm gear reducers usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducers are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducers require less frequent oil changes than other types of gear reducers. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.

China High Efficiency Worm Gear Series Double Enveloping Worm Gear Worm Gearbox     cast iron worm gearboxChina High Efficiency Worm Gear Series Double Enveloping Worm Gear Worm Gearbox     cast iron worm gearbox
editor by czh 2022-11-25

Recent Posts